Preventative Water Heater Maintenance in 10 Minutes

Posted by on Sep 24, 2014 in Water Heater Repair West Palm Beach

Water heater maintenance in ten minutes? Yep, that’s true. Water Heater Repair West Palm Beach is going to explain how to do some water heater preventative maintenance. And, that’s all it will take for these 2 crucial water heater upkeep jobs; nonetheless, we know that these will do an exceptional task of assisting with 3 things:

  • Having a water heater last as long as possible for it will conserve on cash with running it.
  • Making sure the water heater runs safely is important for we do not desire it to blow up in your home.
  • And having it run more energy efficiently also helps one conserve one some cash.

We are now all set to invest 10 minutes once or two times a year to help conserve some cash on energy costs.

Testing the T&P Relief Valve
The T&P Valve, also called the temperature and pressure relief valve, has an important job. It’s job is to assist to make sure excess pressure inside the water storage tank does not build up, or in much more easy terms, it sees to it that the water heater does not blow up. The T&P valve is the part that has a lever or little handle. Just raise it some then release it back. Ideally, it snaps back to its shut position rapidly. Ideally, a little water is heard going into the drain pipe below the lever that was just lifted and possibly heard some pressure being released also. If none of these things have actually happened during the test, the valve will should be changed.

Do a Mini Water Heater Tank Flush
Unfortunately, rust and corrosion will take place inside the water tank because of the chemical reactions taking place with all the elements inside that are required to heat water. We will not get too technical right here, but it is simple to help prevent this process by doing a flush or draining of all or some of the water in the storage tank.

For just a tiny flush, put a container under the drain valve below the tank. Open the drain valve and fill the bucket with water. Drain a minimum of a few gallons of water in total. Let the water sit in the container for a few minutes to settle and analyze if there is much that settles to the bottom of the container. If there is, if the water heater has not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature dial down and might desire to let the water cool down for about an hour first so it is not too hot while draining it. Likewise, it would be much easier to connect a hose to the drain valve and let the water go outside instead of making use of pails.

If the water looks relatively clean and clear from the mini test you should be all set. When the water heater has a large quantity of sediment inside of it, it can make loud popping sounds and it reduces its effectiveness too.

Though water heaters are fairly upkeep free and simple to operate, whenever one feels the slightest uncomfortable or are not sure of exactly what to do, it is always best to have give Water Heater Repair West Palm Beach FL a call to assist with ones regular water heater maintenance.

Here is an infographic that illustrates these steps, and check out our blog more water heater tips and advice.

Water Heater Repair West Palm Beach